How To Check CPU Temperature 2021

Does your CPU temperature get too high? Well, heating of CPU generally comes up whenever you try to overclock your processor.
Overheating the CPU sometimes leads to hardware failure and it can drastically reduce your device’s lifespan. Well, what if I would say I have a solution! So, here are a couple of suggestions that will tell you how you can check your CPU temperature. Also, we will tell you how you can keep the CPU temp within the acceptable range.

So, without wasting time lets quickly get started.

What are the causes of CPU High Temperature and How to Prevent Them?

So, let us have an in-depth look at determining and troubleshooting caused by a high CPU temp.

1. Lack of Thermal Paste

The thermal paste fills in the gaps between the CPU processor as well as the heatsink aids in efficient heat transfer. It is being said that running a CPU with no thermal paste is like driving a car without oil. And when you ignore warning signs, it comes as a result of instant engine failure.

So, to get rid of the lack of thermal paste you need to follow the guide as follows –

i) Initially, check whether your CPU needs a new thermal paste or not.

ii) Once checked to locate the heatsink, remove it from the processor, wipe off any excess paste and squeeze a pea-sized amount of paste onto the processor.

iii) Now again place the heatsink back on the processor and monitor the temperature for the next few days using speccy or any other tool.


2. Too Much Dust

One of the major reasons for high CPU temperature range is due to the dust build-up and clogging of air vents. It is said that you must clean your fans regularly and you can do this by following the given below steps.

i) First, ground yourself by touching the metal to avoid any electrical discharge to the computer parts.

ii) Use the compressed air from a 6-inch distance, and blast away the clumps of dust from fan blades, motherboard, power supply as well as all other components.

iii) If you’re not able to reach some of the places then, in that case, you can use a Q-tip dipped in 90% isopropyl alcohol.


3. Malware Infection Found

The most common reason for the slowing down of the computer is a severe malware infection. A safe CPU temp sometimes gets caused by malware infection and your system runs at the snail’s pace. Some of the common malware infection which affect the CPU temperature includes –

i) Viruses (System infectors, File infectors, and macro)

ii) Trojans (Backdoor, Rootkit, Exploit)

iii) Worms (Emails, Internet, Network)

Now to fix your Windows 10 CPU temp is by using some of the popular as well as free anti-virus malware programs include –

i) Malwarebytes

ii) Bitdefender

iii) AVG (Used to safe pc from internet viruses)

iv) Avast

v) Windows Defender

You can any of these programs or a combination of programs to identify and remove any malware infection on your computer.

4. Stop Overclocking

If you are a gamer and want to improve your CPU speed in that case you try to overclock your CPU speed.

Overclocking means that when you increase the CPU’s speed rate through the BIOS settings, which mainly improves the overall performance of your computer.

Overclocking = more CPU heat generation = High CPU temperature

Now, if you invest in the excellent heatsink/CPU cooler set up, then your CPU should continuously stay cool. However, if you overclock your CPU excessively with a subpar cooling system, the CPU will overheat, throttle, and sometimes may cause a system failure.


To get rid of or want to disable overclocking you can check out this complete guide.

How to check CPU temperature?

Method #1: BIOS


One of the easiest and most basic methods to check CPU temperature Windows 10 is through your motherboard’s BIOS so, if you are looking for the ways to access the BIOS here we have mentioned them.

  1. Turn on or restart your PC.
  2. Wait until the boot-up sequence takes place.
  3. Now once you hear the beep signal, start pressing the Delete Key on your keyboard until the BIOS pops up.

Now a lot of questions arise in your mind that if we can check CPU temperature with BIOS then why use CPU temp monitors. Well, I have a solution for every possible query which may arise while you’re using BIOS.

So what’s the downside of using BIOS for temperature monitoring?

Now, let’s quickly find out the solution for all these questions one by one.

Always remember that every BIOS will look the same, especially when you’re using gaming motherboards. However, they all are simple to navigate – just glance over the different tabs and sections until you get the CPU settings.

Note: You can see the temperature of the CPU, from the given below screen and make sure everything is under control.

Moreover, if you are accessing BIOS for the very first time then you might get scared; however, you must not be worried about changing something that you shouldn’t tamper with – when exiting the BIOS.

The BIOS will always display a prompt asking whether you want to save changes, so it’s easy to rectify any mistakes you might have made!

Now the real downside of using BIOS for temperature monitoring is that you need to restart the computer every single time when you want to check the temperatures. Also, if you need to check the CPU temp frequently, then read on for some solutions that are available from your desktop.


Method #2: Windows Apps

The next method to check CPU Temperature is by using Windows Apps. You don’t need to get into the UEFI/BIOS to measure your CPU’s temperature. Monitoring applications use the same physical temperature sensors in your system as your UEFI/BIOS; however, you need to make it accessible right through windows.

Moreover, there is a number of first as well as third-party apps out there which according to us can be used to get quick and easy access to manage your CPU’s temperature and a lot more information. Some of the Windows Apps to check good CPU temp can be a little overwhelming, however, if you’re looking to find out how to check pc temperature, here we have listed some of the best.

1. Intel XTU

If you are using an Intel Core Processor, then Intel’s Extreme Tuning Utility (XTU) is the best way to check how hot your processor is running. Although Intel XTU is primarily designed as an overclocking tool, and therefore it comes with many built-in monitoring functions as well.

Step 1. Download and Install the Program

Initially, you need to find out how hot your CPU is when running it. Download the program from Intel’s download center and install it on your system.

Step 2. Boot it Up and check your CPU Temperature

After the installation process of the Intel XTU boot up your system, and it would present a lot of information; however, in the lower panel of the main screen, you’ll see the few pieces of crucial information about your CPU.

Now, this particular guide is the “package temperature” and associated with the graph. This graph is your CPU temperature.

Step 3. Check your CPU Utilisation

You can see how hard your CPU is working by its CPU Utilization percentage.

The higher the CPU Utilization, the more your CPU is working.

Also, if you want to see how it does under stress, you can use XTU’s built-in CPU benchmark under the relevant left-hand tab.


2.AMD Ryzen Master

If you’re using AMD’s new Ryzen processors, you can make use of AMD’s own Ryzen Master tool. It works in the same way as Intel’s XTU; however, it works for Ryzen chips only. So, if you want to do a CPU heat monitor then follow the given below steps.

Step 1. Download & Install AMD Ryzen Master

Head on over to the AMD Ryzen Master download centre to download and install the program.

Step 2. Check the cores

Along with with the core clock-tweaking abilities, it also has a CPU temperature monitor which you can view on the left-hand side. Like the XTU, there’s also a graph that can plot your CPU’s temperature over time and even breaking it down by the core.

You can also see the individual cores that whether they are getting warmer than others.

Step 3. CPU Heat Monitor

The Ryzen Master Tool can also give you the average and peak readings. You can see how hot your CPU gets over a span of time which is great for those concerned about the time of day or outside forces affecting CPU temperature.

So, using these Windows App Tools, you can easily check your CPU temp. However, if you want to monitor your CPU temperature with some other CPU temperature monitoring software for Windows, then you must check out our top 3 picks of the year.


What is the Idle CPU Temperature?

It is being said that the maximum supported temperature varies from processor to processor. Now, most of the free monitoring software doesn’t give the information for some reason.

The point at which your processor freaks out and shuts down to avoid damage is known as maximum temperature. Now if your system is running anywhere near, that is bad for the long-term life of your hardware.

Here is the idle CPU temperature range are as follows:

i) If you’re under 60° C: You’re running great!

ii) If you’re at 60° C to 70° C: You’re still running fine, but it is a bit warmer.

Solution: Consider cleaning the dust out of your PC.

iii) If your CPU temp is 70° C to 80° C: Your system is running hotter than usual. You’re pushing an overclock. If you’re not, then make sure your fans are working.

iv) If your CPU temp is 80° C to 90° C: Your systems are getting hot, and this may lead to the system failure.

Solution: Check your hardware for broken fans or dust build-up.

v) Over 90° C: Your system is in danger and will undoubtedly lead to system failure.


Top 3 Best CPU Temperature Monitor Softwares

Lets quickly have a look at the best CPU temp monitor tools.

1. Speccy

If you want to measure the current temperature of your CPU easily and flexible, then Speccy is the best fit for you. It is popularly known as a daily driver that you should have on your system. Speccy is free of cost and is supported for both 32 bit as well as 64 bit systems.

Moreover, after an update, the company now offers users both free as well as premium versions. The difference between the open and charge version is that the free version will provide you with advanced insight into your PC. However, in the paid version you will get all the functions including automatic updates and additional supports.


The professional version of the Speccy is around 25$. Now if you ask me that which you should try, then I would say that free version is enough for you to do the most of the task.


i) Supports and analyze things from sensors in all the motherboards with temperature and voltage data.

ii) It supports the system and allows you to take snapshots.

iii) Automatically diagnosing problems arising from operation to computer.


i) Quite expensive

ii) There is no alarm that can help you understand what your computer’s health is.

2. HWMonitor

The next and one of the best CPU temp monitors featured on our list is HWMonitor which is entirely free of cost to use. Moreover, the HWMonitor not only monitors CPU temperature range but it also has many other advanced features.

Now, with the portable version, you don’t need to install it, all you have to do is use the built-in program. With all these features the HWMonitor will have full of information about the temperature as well as other CPU voltages.


Here are some of the pros and cons of HWMonitor!


i) Quite small in size and speedy too.

ii) Support to record log files and shows the information on sensors.

iii) Free of cost to use and download.


i) Difficult to connect to perform its function.

ii) Novel hardware is more suitable with HWMonitor.

3. Core Temp

One of the most popular as well as quite straightforward tools to check CPU temperature monitors in Windows is Core Temp. This CPU temperature monitoring software has the most straightforward user-interface among all the other software.

Frankly, speaking this monitoring temperature software is not the best according to me; however, its feature may help you more than that. Moreover, you can use Core Temp without paying even a single penny. It’s entirely free of cost and can be managed easily.

Core Temp is a compact and no fuss tool which is quite a robust program to monitor processor temperature as well as other critical information. It is capable of showing each individual core of every processor in your system!


Let’s quickly discover some of the pros and cons of the Core Temp.

i) User-friendly interface makes it easy to use the software.

ii) Supports other operating systems as well.


i) No support for capping a video.

The Final Thoughts

Is the article helpful?

Hopefully, we have shared every possible information about the CPU temperature. This article primarily gives you a little insight into CPU temp and how you can monitor them using different CPU temperature monitoring tools.

if you are looking at ways to disable your Avast Antivirus, then check it out here.

Moreover, the methods as well as the tools which we have mentioned are 100% tested and are working. Now, if you have any queries or suggestions then do enlighten them in the comment section.

Leave a Comment